RUST PREVENTATIVE (Light Oil Film)
FS CG 4250 is a light oil film rust preventative designed to protect parts stored indoors for up to 1 year.
AQUEOUS LONG TERM RUST PREVENTATIVE
FS CG 4232 RTU is a water soluble rust inhibitor formulated to replace solvent reduced rust preventatives.
RUST PREVENTATIVE (Dry- Waxy Film)
FS CG 4230 is a rust preventative formulated to protect parts stored indoors for up to 1 year. FS CG 4230 is a solvent cutback which works by depositing a thin, transparent, polar film over the parts after the solvent evaporates.
RUST PREVENTATIVE
FS CG 4221 is formulated with a proprietary blend of anti-corrosion additives, base oils, and solvent, making for an easily applied full coverage rust preventative.
FS CG 10 MS is a light duty multi-purpose oil with excellent cleanliness characteristics. The fluid is clear, very low odor and has a high flash point. This product may be used for light duty honing applications, and can used to replace diesel fuel as a machining fluid.
FS Anti Foam C-2 is a concentrate defoamer used sump side to eliminate foam problems. Unlike most anti foams, the molecular structure of AF C-2 is such that the product is extremely shear stable. Therefore, AF C-2 can be used at lower treatment levels, and can be used less often.
FS Anti Foam 400 is a concentrate defoamer used sump side to eliminate foam problems. Unlike most anti foams, the molecular structure of AF C-2 is such that the product is extremely shear stable. Therefore, AF C-2 can be used at lower treatment levels, and can be used less often.
FS Aluminum Gun Drilling Oil was formulated to meet the demands of high performance shops requiring far more the than the average gun drilling oil, especially for aluminum and other yellow and non-ferrous metals. The proprietary additive chemistries used in FS Aluminum Gun Drilling Oil impart lubricity and drilling characteristics that supersede those found in any other oil we have tested.
FS Synthetic Rotary Screw Air Compressor Oil ISO 46 is a full-synthetic, non-detergent compressor oil formulated to protect rotary screw air compressors against wear and carbon/varnish buildup. Typical service life is 6,000-8,000 hours in normal service.
FS Synthetic Reciprocating Air Compressor Oil ISO 100 is a full-synthetic, non-detergent compressor oil, formulated to protect against wear and varnish in reciprocating air compressors. Oil life is dependent on operating conditions and maintenance practices – a regular oil analysis program is recommended.
FS Spindle Oil is designed for the lubrication and protection of high-speed spindle bearings. It may also be used wherever a rust and oxidation inhibited petroleum oil is specified in a comparable ISO 22 and 10 viscosity grade.
FS Synthetic Compressor Oil is a high quality synthetic compressor oil with viscosity grades ranging from ISO-32 to ISO-150.
Premium compressor oil is engineered with synthetic ester base oils and is compatible with other esters, polyglycols, and petroleum oils. It is formulated to provide extended drain intervals up to 8,000 hours or longer if determined by oil analysis.
FS Concrete Form Oil is a light colored non-staining oil for use on concrete forms. This oil is formulated with a combination of spreading and release agents that provide even spreading of the oil on concrete forms and prevents cement from sticking to the forms.
FS Vacuum Pump Oil is designed for use in universal and other brands of vacuum pumps, including rotary vane and piston types.
FS Mineral (White) Oil delivers value through a high degree of purity, it is colorless, odorless, and tasteless. The purity of FS Mineral (White) Oil accounts for its frequent use in medicinal and cosmetic products.
FS Waylubes are formulated for the sliding ways of all machine tools. They provide good stick-slip friction characteristics and good rust preventative properties.
FS Rock Drill Oil is formulated with high quality mineral oils in combination with additives for extreme pressure performance, rust and corrosion protection, tackiness, foam resistance, and emulsibility.
FS 400 Heat Transfer Fluid provides oxidation and thermal stability in vented systems at continuous temperatures up to 600°F (316°C).
FS Syntheitc R&O Gear, Bearing & Compressor Oil is a high quality rust and oxidation inhibited, synthetic oil fortified with ashless anti-wear additives for excellent gear and bearing protection. It is designed for superior performance in a wide variety of applications.