FS CG 4708-10 is an aqueous rust preventative used to impart short term indoor corrosion protection on metal parts, tanks, equipment, and machine tool surfaces. FS CG 4708-10 does not contain any nitrates, nitrites, silicates, borates, phenols, anti-foam additives, or heavy metals, and the product may be diluted further with water depending on the need and the application.
FS CG 4245 is an oil base, thin film preservative ideally used when parts have been processed through water solutions or exposed to high humidity. It is practically odorless and does not contain solvents or mineral spirits, thus making it a very low VOC product.
FS CG 828 is an ultra-concentrate aqueous rust preventative used to impart short term indoor corrosion protection on metal parts, tanks, equipment, and machine tool surfaces.
FS Kool Kut 384-AL is a heavy duty, Micro Emulsion that exhibits excellent tool life characteristics and superior low foaming tendencies.
FS MULTICUT 851C2L is a high performing cutting fluid designed to enhance metal removal operations. It is formulated with a proprietary blend of high quality base oil and additives for use in sawing, drilling, tapping, boring and machining operations.
FS MULTICUT 851C2L is designed to be used undiluted and not to be mixed with water, oil, or solvent. Wash parts using standard cleaning methods.
FS Synthetic R&O Industrial Gear, Bearing and Compressor Oils are formulated with rust and oxidation-inhibited synthetic base oils and anti-wear additives for excellent gear and bearing protection. These oils are engineered for long oil life and superior performance in a wide variety of applications.
Industrial Metalworking Fluid FS Sump Cleaner
FS Sump Clean is an industrial cleaner/ degreaser formulated to clean the interiors and exteriors of CNC machines.
Liquid Rust Remover
FS Rust-Off will quickly remove rust while not harming steel, copper, iron, brass, or aluminum.
FS RR 1135 is formulated with a proprietary blend of anti-corrosion additives, base oils, and solvent, making for an easily applied full coverage rust preventative.
Heavy Stamping, Machining, & Tapping Oil
FS Quick Tap is a straight oil formulation designed for extremely severe applications.
FS Neutral Orange is an industrial cleaner formulated to clean the exterior of CNC machines, and for cleaning the interior sump areas prior to a pump and dump procedure.
HIGH PERFORMANCE GRINDING OIL
FS MultiCut 68 is formulated with a special blend of extreme pressure additives and wetting agents, the combination of which provides superior performance in high speed grinding operations.
HIGH PERFORMANCE METALWORKING OIL-AEROSPACE
FS Microlube is formulated with a proprietary blend of additives that have been carefully selected to enhance metalworking operations.
High Performance Gun Drilling Oil
FS MGD 80 was formulated to meet the demands of high performance shops requiring far more the than the average gun drilling oil.
FS KW 7300 RTU is another addition to the line of cleaning/ degreasing products developed by FS to meet the demand for greener technologies (renewable components, lower pH and toxicity profiles, readily biodegradable, and little to no VOC’s).
FS KW 7000 represents a new line of floor cleaning/ degreasing products developed by FS to meet the continued demand for greener technologies (renewable components, lower pH and toxicity profiles, readily biodegradable, and little to no VOC’s).
Biodegradable/ Water Based Cleaners
The FS KW 6000 Line of Biodegradable Cleaners is formulated to meet the demanding needs of industry, while at the same time adhering to the Green Initiatives push for products that are biodegradable and VOC compliant.
HIGH PRESSURE/ HIGH TEMPERATURE PARTS CLEANER
FS KW 1000 is an all-purpose heavy duty cleaner composed of highly active ingredients. It is extremely efficient in cleaning all types of oil and grease residues and is safe to use on ferrous and non-ferrous metals.
AN AQUEOUS PARTS CLEANER
FS KW 610 is an all-purpose cleaner composed of highly active ingredients. It is extremely efficient in cleaning all types of oils and is safe to use on ferrous and non-ferrous metals.
High Performance Extruding/ Forming Oil
FS KOOL DRAW 250 is a heavily formulated product blended for the extruding/ forming marketplace.